LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Configurable Customer Control System) >> Diagnostic Information & Procedures >> Steering Wheel Controls Inoperative >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2008 Saturn Sky and 2008 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR Caution .
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test for infinite resistance between the signal terminal 1 and the 10-volt reference terminal 2 with the switch in the open position.
    • If not the specified value, replace the switch.
  3. Test the resistance values between the signal terminal 1 and the 10-volt reference terminal 2 with the switch closed in each position, and verify are approximate to what the schematic reads.
    • If values do not match, replace the switch.