Inflatable Restraint Front End Sensor Replacement

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inflatable Restraint Front End Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Inflatable Restraint Front End Discriminating Sensor Stud (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure: Loosen the studs and slide the module up and out of the keyhole slots. Tighten: 8 N.m (71 lb in)
2	Inflatable Restraint Front End Discriminating Sensor Assembly WARNING: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. WARNING: Refer to SIR Warning .