LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Vue Green Line, 3.6 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L (LCS) - Introduction >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution
  1. Install the ECT sensor and tighten to 22 N.m (16 lb ft).
    2. Fig 2: Generator Terminal Nut
    GM1888716Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (10) to the ECT sensor (3).
  3. Install the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement (HP7) or Underhood Electrical Center or Junction Block Replacement (HP5)
  4. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill With HP5) or Cooling System Draining and Filling (Static Fill Without HP5) or Cooling System Draining and Filling (GE 47716 Fill With HP5) or Cooling System Draining and Filling (GE 47716 Fill Without HP5)
scientia non olet · About LEMON Manuals