Component Testing
- Ignition OFF, disconnect the harness connector at the appropriate Camshaft Position Actuator Solenoid Valve.
- Test for 5-9 Ω between the control terminal A and the low reference circuit terminal B of the Camshaft Position Actuator Solenoid Valve.
- If not within the specified range, replace the Camshaft Position Actuator Solenoid Valve.
- Test for infinite resistance between each terminal and the Camshaft Position Actuator Solenoid Valve housing.
- If not the specified value, replace the Camshaft Position Actuator Solenoid Valve.