Section 717 (Engine Control System): ECM: Replacement
WARNING: This page is about a different car, the 2004 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE GLOVE COMPARTMENT DOOR ASSY (See INSTRUMENT PANEL/METER )
- REMOVE ECM
- Disconnect the 4 ECM connectors.
- Remove the 2 bolts, then remove the ECM.
- Remove the 2 screws and ECM bracket from the ECM.
- Remove the 2 screws and ECM bracket No. 2 from the ECM.
- Remove the 2 screws and ECM bracket No. 3 from the ECM.
- INSTALL ECM
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
- INSTALL GLOVE COMPARTMENT DOOR ASSY (See INSTRUMENT PANEL/METER )