Service Data
SERVICE DATA SPECIFICATIONS
| Front Wheel Alignment | |||
| Vehicle Height | |||
| A-B | 82 mm (3.22 in.) | ||
| D-C | 12 mm (0.47 in.) | ||
| Toe-In (Total) | 0° +/- 11' (0° +/- 0.19°), 0 +/- 2 mm (0 +/- 0.08 in.) | ||
| Toe-In (Total) Rack End Length Difference | 1.5 mm (0.059 in.) or less | ||
| Wheel Angle | |||
| Inside Wheel | 33°42' (31°42' -- 35°42') 33.70° (31.70° -- 35.70°) |
||
| Outside Wheel: Reference | 30°04' 30.07° |
||
| Camber | -0°34' +/- 45' (-0.57° +/- 0.75°) | ||
| Camber Right-Left Error | 30' (0.5°) or less | ||
| Caster | 1°45' +/- 45' (1.75° +/- 0.75°) | ||
| Caster Right-Left Error | 30' (0.5°) or less | ||
| Steering Axis Inclination | 10°01' +/- 45' (10.02° +/- 0.75°) | ||
| Steering Axis Inclination Right-Left Error | 30' (0.5°) or less | ||
| Front Suspension Lower Ball Joint Turning Torque | 5.0 N.m (51 kgf.cm, 44 in.lbf) or less | ||
A: Ground clearance of lower suspension arm front bolt center
B: Ground clearance of front wheel center
C: Ground clearance of axle beam set bolt center
D: Ground clearance of rear wheel center