Road Test

HINT:

SET and '-', RES and '+', ON-OFF functions share the same switch. Operate the cruise control main switch according to the directions (↓, ↑, ←) indicated on the switch.

1. PROBLEM SYMPTOM CONFIRMATION 
   1. Inspect the SET function.
      1. Push the ON-OFF button.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push down the cruise control main switch to "SET / -".
      4. After releasing the switch, check that the vehicle cruises at the set speed.
   2. Inspect the '+' (ACCEL) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push down the cruise control main switch to "SET / -".
      4. Check that vehicle speed increases while the cruise control main switch is pushed up to "RES / +", and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily (approximately 0.6 seconds) push up the cruise control main switch to "RES / +" and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).
         Fig 1: Inspecting (ACCEL) Function

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Inspect the '-' (COAST) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push down the cruise control main switch to "SET / -".
      4. Check that vehicle speed decreases while the cruise control main switch is pushed down to "SET / -", and the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily (approximately 0.6 seconds) push down the cruise control main switch to" SET / -", and then immediately release it. Check that the vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).
         Fig 2: Inspecting (COAST) Function

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Inspect the CANCEL function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push down the cruise control main switch to "SET / -".
      4. When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
         • Depressing the brake pedal
         • Depressing the clutch pedal (Manual Transaxle)
         • Moving the shift lever from the D position to the N, 2 or L position.
         • Pushing the ON-OFF button off
         • Pulling the cruise control main switch to CANCEL
           Fig 3: Inspecting CANCEL Function

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   5. Inspect the RES (RESUME) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push down the cruise control main switch to "SET / -".
      4. When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
         Fig 4: Inspecting RES (RESUME) Function

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
         • Depressing the brake pedal
         • Depressing the clutch pedal (manual Transaxle)
         • Moving the shift lever from the D position to the N, 2 or L position.
         • Pulling the cruise control main switch to CANCEL
      5. After pushing the cruise control main switch to "RES / +" at a driving speed of more than 40 km/ h (25 mph), check that the vehicle restores the speed prior to the cancellation.