LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xB Automatic >> Repair and Diagnosis >> Engine Performance >> System >> 2AZ-FE Engine Control System - DTC P060A - P2A00 >> DTC P060D Internal Control Module Accelerator Pedal Position Performance >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. READ OUTPUT DTC (DTC P060D) 
    1. Connect an intelligent tester or a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Clear DTC (See DTC CHECK/CLEAR ).
    5. Turn the ignition switch to OFF and turn the tester OFF.
    6. Disconnect the tester.
    7. Disconnect the cable from the battery negative (-) terminal and wait for 1 minute.
    8. Connect the cable to the battery negative (-) terminal.
    9. Connect the tester to the DLC3.
    10. Turn the ignition switch to ON.
    11. Turn the tester ON.
    12. Select the following menu items:
      1. Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
      2. Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
    13. Read DTCs.

      Result 

      RESULT REFERENCE

      Result Proceed to
      No output A
      P060D B

    B : REPLACE ECM  (See REMOVAL )

    A :  CHECK FOR INTERMITTENT PROBLEMS 

scientia non olet · About LEMON Manuals