System Outline

While the ignition or start switch is ON, pulling the door switch up one step or pushing it down one step causes the door glass to move upward or downward respectively. Manually operating the power window regulator master switch assembly also allows for each window to be remotely controlled from the driver's seat. The door glass stops at the position it is currently in when the switch is released.

While the ignition or start switch is ON, pushing the master switch down two steps causes the driver door glass to automatically move downward to the full-open position without the switch needing to be held down. The auto can be interrupted by pulling the switch up one step, at which point the door glass will stop moving.

All the power window operations except the driver door glass will be disabled when the window lock switch on the power window regulator master switch assembly is switched on.