Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to the O-ring on the camshaft oil control valve assembly.
  
  Fig 1: Identifying O-Ring On Camshaft Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft oil control valve assembly with the bolt.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
3. Connect the camshaft oil control valve assembly connector.
  
  Fig 2: Locating Camshaft Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the vacuum hose clamp with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  Fig 3: Locating Vacuum Hose Clamp W/Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL OUTER COWL TOP PANEL
1. Install the cowl top panel outer with the 10 bolts.
  Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
  
  Fig 4: Locating Cowl Top Panel Outer Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the wire harness.
Fig 5: Locating Wire Harness
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WIPER MOTOR AND LINK (See INSTALLATION )
INSTALL COWL TOP VENTILATOR LOUVER LH (See INSTALLATION )
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
INSTALL HOOD TO COWL TOP SEAL (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (See INSTALLATION )
INSTALL WINDSHIELD WIPER ARM COVER (See INSTALLATION )
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )