Service Data
2AZ-FE LUBRICATION - SERVICE DATA
| Oil pressure switch | Oil pressure | Standard | Idling | 29 kPa (0.3 kgf/cm2 , 4.3 psi) or more |
| 3000 rpm | 170 to 300 kPa (1.7 to 3.1 kgf/cm2 , 24 to 44 psi) | |||
| Oil pump rotor | Side clearance | Standard | 0.030 to 0.085 mm (0.0012 to 0.0033 in.) | |
| Maximum | 0.16 mm (0.0063 in.) | |||
| Tip clearance | Standard | 0.080 to 0160 mm (0.0031 to 0.0063 in.) | ||
| Maximum | 0.35 mm (0.0138 in.) | |||
| Body clearance | Standard | 0.100 to 0170 mm (0.0039 to 0.0067 in.) | ||
| Maximum | 0.325 mm (0.01128 in.) | |||
| No. 2 chain sub-assembly | Chain elongation | Maximum | 52.4 mm (2.063 in.) | |
| Crankshaft timing gear or sprocket | Sprocket diameter (with Chain) | Minimum | 48.2 mm (1.898 in.) | |
| Oil pump drive shaft sprocket | Sprocket diameter (with Chain) | Minimum | 48.2 mm (1.898 in.) | |
| Chain tensioner plate | Wear | Maximum | 0.5 mm (0.020 in.) | |