LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Transmitter Battery >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Battery: Replacement

  1. REMOVE TRANSMITTER HOUSING COVER 
    1. Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
      NOTE: Do not use excessive force when prying apart the housing cover.
      Fig 1: Prying Transmitter Housing Cover
      G05391027Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE DOOR CONTROL TRANSMITTER MODULE 
    1. Remove the door control transmitter module.
      Fig 2: Removing Door Control Transmitter Module
      G05391028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE TRANSMITTER BATTERY 
    1. Twist the coin in the direction of the arrow mark in the illustration, and remove the transmitter battery cover.
      Fig 3: Removing Transmitter Battery Cover
      G05391029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the battery (lithium battery: CR2016).
      NOTE:
      • Do not push the terminals with your finger.
      • Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.
      • Do not touch the battery with wet hands. Water may cause it to rust.
      • Do not touch or move any components inside the transmitter as this may interfere with its proper operation.
        Fig 4: Removing Battery
        G05391030Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL TRANSMITTER BATTERY 
    1. Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.
      NOTE:
      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.
      • Do not bend the transmitter battery electrode during insertion.
      • Keep the transmitter cover interior free of dust and oil.
      Fig 5: Installing Battery
      G05391031Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the hook and install the transmitter battery cover
      Fig 6: Installing Transmitter Battery Cover
      G05391032Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL DOOR CONTROL TRANSMITTER MODULE 
    1. Install the door control transmitter module.
      Fig 7: Installing Door Control Transmitter Module
      G05391033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL TRANSMITTER HOUSING COVER 
    1. Install the transmitter housing cover onto the transmitter housing case securely.
    2. After the installation, press any of the transmitter switches. Check that the LED illuminates.
      Fig 8: Installing Transmitter Housing Cover
      G05391034Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals