Engine Coolant Temperature Sensor: Installation

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Install a new gasket onto the sensor.
2. Using SST, install the sensor.
  SST 09817-33190
  
  Torque: 20 N*m (204 kgf*cm, 14 ft.*lbf)
3. Connect the sensor connector.
  
  Fig 1: Identifying Engine Coolant Temperature Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER ASSEMBLY
1. Install the air cleaner case sub-assembly with the 3 bolts.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
2. Install the wire harness to the air cleaner case sub-assembly.
3. Install the air cleaner filter element sub-assembly.
  
  Fig 2: Locating Air Cleaner Case Sub-Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install and lock the air cleaner cap sub-assembly and air cleaner hose and then tighten the No. 1 air cleaner hose clamp.
  
  Fig 3: Locating Air Cleaner Hose Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the No. 2 fuel vapor feed hose.
6. Connect the No. 2 ventilation hose to the air cleaner hose.
  
  Fig 4: Locating Fuel Vapor Feed Hose And Ventilation Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Install the vacuum switching valve assembly.
  
  Fig 5: Locating Vacuum Switching Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Install the wire harness.
9. Connect the mass air flow meter connector.
Fig 6: Locating Mass Air Flow Meter Connector And Wire Harness
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )