DTC Check / Clear
WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Connect an intelligent tester or Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
- Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
- Read the DTCs.
- CLEAR DTC
- Connect an intelligent tester or Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO.
- Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
- Erase the DTCs.