Combination Meter: Installation

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COMBINATION METER ASSEMBLY
1. Connect the 2 connectors.
2. Install the wire harness.
  
  Fig 1: Locating Wire Harness Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the combination meter with 4 screws
Fig 2: Locating Combination Meter Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)