Torque Specifications
WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
2AZ-FE CHARGING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Wire harness clamp bracket x Generator assembly | 8.4 | 86 | 74 in.*lbf | |
| Generator assembly x Cylinder block | Bolt A | 21 | 215 | 16 |
| Bolt B | 52 | 530 | 38 | |
| Generator wire x Terminal B | 9.8 | 100 | 87 in.*lbf | |
| Negative battery terminal x Battery | 5.4 | 55 | 47 in.*lbf | |
| Generator drive end frame x Bearing retainer plate | 2.3 | 23 | 20 in.*lbf | |
| Generator coil assembly x Generator drive end frame | 5.8 | 59 | 51 in.*lbf | |
| Cord clip x Generator coil assembly | 4.6 | 47 | 41 in.*lbf | |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf | |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf | |
| Generator clutch pulley x Generator rotor assembly | 111 | 1127 | 82 | |