Fuel Lid Lock Control: Installation
- INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
- Install the fuel lid lock control cable sub-assembly by inserting it and turning it clockwise, as shown in the illustration.
- Engage the 5 clamps and install the fuel lid lock control cable sub-assembly.
- Engage the clamp and connect the fuel lid lock control cable sub-assembly as shown in the illustration.
- Connect the fuel lid lock control cable sub-assembly as shown in the illustration.
- INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
- Engage the claw as shown in the illustration.
- Install the fuel lid lock open lever sub-assembly with the bolt.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (See INSTALLATION )
- INSTALL REAR SEAT OUTER BELT ASSEMBLY LH (See INSTALLATION )
- INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (See INSTALLATION )
- INSTALL REAR DECK TRIM COVER (See INSTALLATION )
- INSTALL DECK BOARD ASSEMBLY (See INSTALLATION )
- INSTALL CENTER PILLAR LOWER GARNISH LH (See INSTALLATION )
- INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (See INSTALLATION )
- INSTALL LAP BELT OUTER ANCHOR COVER (See INSTALLATION )
- INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (See INSTALLATION )
- INSTALL REAR DOOR SCUFF PLATE LH (See INSTALLATION )
- INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (See INSTALLATION )
- INSTALL COWL SIDE TRIM BOARD LH (See INSTALLATION )
- INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
- INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )
- INSTALL REAR SEAT ASSEMBLY LH (See INSTALLATION )
- INSTALL NO. 1 REAR SEAT LEG COVER LH (See INSTALLATION )
- INSTALL NO. 2 REAR SEAT LEG COVER LH (See INSTALLATION )
- INSTALL DECK BOARD ASSEMBLY (See INSTALLATION )
- INSTALL FRONT SEAT ASSEMBLY LH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- INSPECT SRS WARNING LIGHT