Installation

1NR-FE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION

1. INSTALL MASS AIR FLOW METER

(a) Install the mass air flow meter onto the air cleaner cap sub-assembly with the 2 screws.

Reference - Torque : 0.7 Nm (7 kgf-cm, 6 in-lbf)

NOTICE:
* If a component has been dropped or subjected to a strong impact, replace it.
* Make sure that the O-ring is not damaged or does not jump out of position during installation.

(b) Connect the connector of the mass air flow meter.