Fuel Pump: Reassembly: Reassembly

INSTALL NO. 2 FUEL TANK CUSHION
1. Install the No. 2 fuel tank cushion.
  
  Fig 1: Identifying No. 2 Fuel Tank Cushion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP
1. Apply gasoline to a new O-ring, and then install the new O-ring to the jet pump.
  
  Fig 2: Identifying Jet Pump O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws.
  
  Fig 3: Identifying Jet Pump Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the claw to install the jet pump to the fuel pump.
  
  Fig 4: Identifying Jet Pump Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Apply gasoline to a new O-ring, and then install the new O-ring to the fuel suction plate.
  
  Fig 5: Identifying Fuel Suction Plate O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the fuel pump spacer onto the fuel pump.
  
  Fig 6: Identifying Fuel Pump Spacer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Engage the 3 claws.
  
  Fig 7: Identifying Fuel Pump Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Engage the 2 claws to install the fuel pump to the fuel suction plate.
  
  Fig 8: Identifying Fuel Pump Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP FILTER
1. Apply gasoline to a new O-ring, and then install the new O-ring to the fuel pump.
  
  Fig 9: Identifying Fuel Pump O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws to install the fuel pump filter to the fuel pump.
  
  Fig 10: Identifying Fuel Pump Filter Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
1. Apply gasoline to 2 new O-rings, and then install the new O-rings to the fuel pressure regulator assembly.
  
  Fig 11: Identifying Pressure Regulator O-Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the fuel pressure regulator assembly to the fuel suction plate.
  
  Fig 12: Identifying Pressure Regulator From Fuel Suction Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 FUEL SUCTION SUPPORT
1. Engage the 2 claws to install the No. 2 fuel suction support.
  
  Fig 13: Identifying No. 2 Fuel Suction Support Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP HARNESS
1. Connect the 2 fuel pump harness connectors and install the fuel pump harness.
  
  Fig 14: Identifying Fuel Pump Harness Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not damage the wire harness.