Removal

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL

CAUTION:
Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD ASSEMBLY Removal

5. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.





(b) Remove the 2 screws and switch.