Reassembly

HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REASSEMBLY

1. INSTALL NO. 1 HEATER CONTROL SUB-ASSEMBLY

(a) Attach the 2 claws to install the No. 1 heater control sub-assembly.

NOTICE:
* When attaching the claws, be careful not to apply excessive force to the center lower instrument cluster finish panel sub-assembly as it may be damaged.
* Check for looseness after installing the No. 1 heater control sub-assembly to the center lower instrument cluster finish panel sub-assembly. If there is any looseness, replace the center lower instrument cluster finish panel sub-assembly.

2. INSTALL NO. 2 HEATER CONTROL SUB-ASSEMBLY

(a) Attach the 2 claws to install the No. 2 heater control sub-assembly.

NOTICE:
* When attaching the claws, be careful not to apply excessive force to the center lower instrument cluster finish panel sub-assembly as it may be damaged.
* Check for looseness after installing the No. 2 heater control sub-assembly to the center lower instrument cluster finish panel sub-assembly. If there is any looseness, replace the center lower instrument cluster finish panel sub-assembly.

3. INSTALL NO. 3 HEATER CONTROL SUB-ASSEMBLY

(a) Attach the 2 claws to install the No. 3 heater control sub-assembly.

NOTICE:
* When attaching the claws, be careful not to apply excessive force to the center lower instrument cluster finish panel sub-assembly as it may be damaged.
* Check for looseness after installing the No. 3 heater control sub-assembly to the center lower instrument cluster finish panel sub-assembly. If there is any looseness, replace the center lower instrument cluster finish panel sub-assembly.