Speed Sensor: Installation: Installation

INSTALL SPEED SENSOR NC
1. Coat a new O-ring with ATF, and install it into the speed sensor NC.
2. Install the speed sensor NC with the bolt.
  
  Fig 1: Location of Bolt And Speed Sensor NC
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.8 N*m (90 kgf*cm, 78 in.*lbf)
3. Connect the speed sensor NC connector.
INSTALL SPEED SENSOR NT
1. Coat a new O-ring with ATF, and install it into the speed sensor NT.
2. Clean the bolt and bolt hole.
3. Apply adhesive to 2 or 3 threads of the bolt.
  
  Fig 2: Applying Adhesive To End Or Threads Of Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Adhesive
  
  Toyota Genuine Adhesive 1324, Three Bond 1324or equivalent
4. Install the speed sensor NT with the bolt.
  
  Fig 3: Location of Bolt And Speed Sensor NT
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)
5. Connect the speed sensor NT connector.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY See step 33
INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY See step 34
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE . Refer to INSTALLATION - Step 2
INSTALL NO. 2 BATTERY CARRIER See step 36
INSTALL BATTERY . Refer to INSTALLATION - Step 20
INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK