Removal

POWER DISTRIBUTION: BATTERY CURRENT SENSOR: REMOVAL; 2013 MY FR-S [03/2012 -]

1. PRECAUTION

HINT
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with the work Service Precautions.

2. REMOVE BATTERY NEGATIVE TERMINAL

(a) Disconnect the connector.





(b) Remove the nut and disconnect the engine wire.









NOTICE:
Since this operation may damage the molding, make sure to fully open the driver and passenger side door windows.

(c) Loosen the nut and remove the battery negative terminal.