Remote Up / Down Function does not Operate: Procedure

Fig 1: View Of Power Window Lock Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Turn the window lock switch off and operate the switches on the master switch. Check that the remote up/down function operates normally.

   OK

   Remote up/down function operates normally.

NG → See step   2 

OK → END 

1. Check that the passenger side door power window manual up/down function operates normally.

   OK

   Manual up/down function operates normally.

NG → See step   3 

OK → See step   5 

1. Disconnect the E1 power window regulator master switch assembly connector.
2. Disconnect the D1 power window regulator switch assembly connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   E1-18 (D) - D1-2 (SD)	Always	Below 1 Ω
   E1-16 (U) - D1-5 (SU)	Always	Below 1 Ω
   E1-18 (D) or D1-2 (SD) - Body ground	Always	10 kΩ or higher
   E1-16 (U) or D1-5 (SU) - Body ground	Always	10 kΩ or higher

NG → REPAIR OR REPLACE HARNESS OR CONNECTOR 

OK → See step   4