Jam Protection Function does not Operate [01/2014 - ]: Procedure

1. Initialize the power window regulator motor assembly LH. Refer to INITIALIZATION [01/2014 - ] .

NEXT: Go to next step 

1. Check that driver side power window move when the auto up and down function of the power window regulator master switch assembly is operated. Refer to OPERATION CHECK [05/2013 - ] .

   OK

   Driver side power window auto up and down operates normally.

NG → See step   3 

OK → END (PROBLEM DUE TO INITIALIZATION FAILURE) 

1. Check if the jam protection function operates for applicable power window.

   HINT: 

   The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.

   OK

   Jam protection operates normally.

NG → See step   4 

OK → END