Driver Side Index Function Does Not Operate [05/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MASTER SWITCH
   
   

   Tester Display	Test Component	Control Range	Diagnostic Note
   D Door Courtesy SW	Driver side door courtesy light switch signal / ON or OFF	ON: Driver side door opened OFF: Driver side door closed	-

   OK

   On the Techstream screen, ON or OFF is displayed accordingly.

NG → See step   8 

OK: Go to next step 

1. Initialize the power window regulator master switch assembly. Refer to INITIALIZATION [05/2014 - ] .
2. Check the power window regulator master switch assembly is operated. Refer to OPERATION CHECK [05/2014 - ] .

   OK

   Driver side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   NG	A
   OK	B

B → END 

A: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MASTER SWITCH
   
   

   Tester Display	Test Component	Control Range	Diagnostic Note
   Current D Door Glass Position Information	Glass position of the driver side power window / -100 to 700	-	-

   OK

   Pulse generation.

NG → See step   6 

OK: Go to next step 

1. Check the power window regulator master switch assembly operates. Refer to OPERATION CHECK [05/2014 - ] .

   OK

   Driver side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate (Does not window glass operate)	A
   Does not operate	B

B → REPLACE POWER WINDOW REGULATOR ASSEMBLY 

A: Go to next step 

1. Temporarily replace the power window regulator motor assembly with a new or normally functioning one. Refer to REMOVAL [05/2014 - ] .
2. Check the power window regulator master switch assembly operates. Refer to OPERATION CHECK [05/2014 - ] .

   OK

   Driver side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate	A
   Does not operate	B

B → See step   9 

A → END 

1. Temporarily replace the power window regulator master switch assembly with a new or normally functioning one. Refer to REMOVAL [05/2014 - ] .
2. Check the power window regulator master switch assembly operates. Refer to OPERATION CHECK [05/2014 - ] .

   OK

   Driver side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Does not operate	A
   Operate	B

B → END 

A: Go to next step 

1. Temporarily replace the power window regulator motor assembly with a new or normally functioning one. Refer to REMOVAL [05/2014 - ] .
2. Check the power window regulator master switch assembly operates. Refer to OPERATION CHECK [05/2014 - ] .

   OK

   Driver side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate	A
   Does not operate	B

B → REPLACE POWER WINDOW REGULATOR ASSEMBLY 

A → END