How To Proceed With Troubleshooting [06/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

1. Interview the customer and confirm the trouble.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - ]

   Result

   Result
   NEXT

Result:  1

NEXT 

See step  3

1. Check and record DTC and Freeze Frame Data.

   Refer to DTC CHECK / CLEAR [06/2015 - ]  for DTC Check/Clear

   Refer to FREEZE FRAME DATA [06/2015 - ]  for Freeze Frame Data

   Chassis > ABS/VSC/TRAC > Trouble Codes 

2. Clear the DTC and Freeze Frame Data.

   Refer to DTC CHECK / CLEAR [06/2015 - ]  for DTC Check/Clear

   Refer to FREEZE FRAME DATA [06/2015 - ]  for Freeze Frame Data

   Chassis > ABS/VSC/TRAC > Clear DTCs 

3. Reconfirm the DTC.
   1. Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.

      Refer to DTC CHECK / CLEAR [06/2015 - ]  for DTC Check/Clear

      Refer to FREEZE FRAME DATA [06/2015 - ]  for Freeze Frame Data

      Chassis > ABS/VSC/TRAC > Trouble Codes 

      HINT: 

      • If DTC U0100, U0124 or U0126 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit.

        Refer to CHECK FOR INTERMITTENT PROBLEMS [06/2015 - ] 

      • If there is no response from the skid control ECU (brake actuator assembly), inspect the IG1 circuit of the skid control ECU (brake actuator assembly).

        Refer to DTC C1241: Low Power Supply Voltage Malfunction [06/2015 - ]

   Result

   Result	Proceed to
   DTCs are output.	A
   DTCs are not output (Problem symptom does not occur).	B
   DTCs are not output (Problem symptom occurs).	C

Result:  2

B 

See step  5

Result:  3

C 

See step  6

Result:  1

A 

See step  4

1. Proceed to Diagnostic Trouble Code Chart.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2015 - ] 

   Result

   Result
   NEXT

Result:  1

NEXT 

See step  7

1. Proceed to Check for Intermittent Problems.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - ]

   Result

   Result
   NEXT

Result:  1

NEXT 

See step  6

1. Proceed to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [06/2015 - ] 

   Result

   Result
   NEXT

Result:  1

NEXT 

See step  7

Result

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

See step  9

Result

Result:  1

NEXT 

See step  10

Result

Result:  1

NEXT 

END