Electrical function schematic for purging function - PE47.30-P-2052-97DAI
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 with ENGINE 276
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Oxygen sensor element, signal | 3F |
| 2 | Intake manifold intake air temperature sensor, signal | 6G |
| 3 | Engine load, signal | 4G |
| 4 | Intake air temperature sensor, signal | 5G |
| 4 | Intake air temperature sensor, signal | 5D |
| 5 | Coolant temperature sensor, signal | 3E |
| 6 | Purging switchover valve, actuation | 3D |
| 7 | Engine speed, signal | 6D |
| 8 | Circuit 87, status | 6E |
| B11/4 | Coolant temperature sensor | 1D |
| B17 | Intake air temperature sensor | 5A |
| B17/1 | Intake manifold intake air temperature sensor | 7G |
| B2/5b1 | Intake air temperature sensor | 5K |
| B28/7 | Pressure sensor downstream of throttle valve | 3H |
| B70 | Crankshaft Hall sensor | 7C |
| G3/3b1 | Left oxygen sensor element upstream of catalytic converter | 2G |
| G3/4b1 | Right oxygen sensor element upstream of catalytic converter | 2G |
| N10/1 | Front SAM control unit with fuse and relay module | 10E |
| N10/1kN | Engine circuit 87 relay | 8E |
| N3/10 | ME-SFI [ME] control unit | 5E |
| U1020 | Valid for gasoline engine with stratified operation | 4J |
| U1021 | Not valid for gasoline engine with stratified operation | 4A |
| Y58/1 | Purge control valve | 3C |