All Models (Rear)
If toe-in is not within specifications, loosen bolts holding torsion bar bushing to body. Bushing is fixed to body at elongated holes. Moving bushing forward decreases toe-in and moving it rearward increases toe-in. Tighten bolts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| All Models | ||||||
| Front | 3/4 | 1 1/2 | 5/64 to 5/16 | 36 | 35 | |
| Rear | ..... | 1 | 3/64 to 13/64 | ..... | ..... | |