All Models (Rear)
If toe-in is not within specifications, loosen bolts holding torsion bar bushing to body. Bushing is fixed to body at elongated holes. Moving bushing forward decreases toe-in and moving it rearward increases toe-in. Tighten bolts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||||
|---|---|---|---|---|---|---|---|---|
| Inner | Outer | |||||||
| 1400 | ||||||||
| Front | 3/4 ± 3/4 | 1 1/2 ± 1/2 | 5/64 to 5/16 | 36 | 35 | |||
| Rear | (1)7/8 ± 5/8 | 3/64 to 13/64 | ||||||
| 4WD Station Wagon | ||||||||
| Front | 3/4 ± 3/4 | 1 1/2 ± 1/2 | 7/32 to 15/32 | 31 | 30 | |||
| Rear | 1 5/6 ± 1/2 | 5/64 to 15/64 | ||||||
|
||||||||