LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1992 >> Justy Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment Specifications

WARNING: This page is about a different car, the 1990 Subaru XT6, 1990 Subaru XT, 1990 Subaru Loyale, 1990 Subaru Legacy, and 1990 Subaru Justy. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (JUSTY)

Application Preferred Range
Camber (1)
Front 1 1/16 -1/4 To 1 5/8
Rear - -
Caster (1) 2 1/2 1 1/2 To 3 1/2
Toe-In (1)
Front 3/32 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 3/16 1/16 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY SEDAN - 2WD)

Application Preferred Range
Camber (1)
Front -1/4 -3/4 To 1/4
Rear 1/2 -1 1/2 To 1/2
Caster (1) 3 1/16 2 1/16 To 4 1/16
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY SEDAN - 4WD)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -1/2 -1 To 0
Caster (1) 3 2 To 4
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY WAGON - 2WD)

Application Preferred Range
Camber (1)
Front -1/4 -3/4 To 1/4
Rear -5/16 -1 5/16 To 11/16
Caster (1) 2 13/16 1 13/16 To 3 13/16
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY WAGON - 4WD)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -5/16 -1 5/16 To 11/16
Caster (1) 2 3/4 1 3/4 To 3 3/4
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE - 2WD)

Application Preferred Range
Camber (1)
Front 3/4 0 To 1 1/2
Rear 0 -1/2 To 1/2
Caster (1) 2 1/2 1 3/4 To 3 1/4
Toe-In (1)
Front 1/16 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/8 1/16 To 1/8
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE - 2WD)

Application Preferred Range
Camber (1)
Front 1 11/16 15/16 To 2 7/16
Rear 0 -1/2 To 1/2
Caster (1) N/A N/A
Toe-In (1)
Front 3/16 (5) 5/32 To 1/4 (4 To 6)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/4 3/16 To 5/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE WAGON - 2WD)

Application Preferred Range
Camber (1)
Front 1 1/4 To 1 3/4
Rear 0 -1/2 To 1/2
Caster (1) 2 1/16 1 5/16 To 2 13/16
Toe-In (1)
Front 1/16 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/8 1/16 To 1/8
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE WAGON - 4WD)

Application Preferred Range
Camber (1)
Front 1 3/4 1 To 2 1/2
Rear 0 -1/2 To 1/2
Caster (1) N/A N/A
Toe-In (1)
Front 3/16 (5) 5/32 To 1/4 (4 To 6)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/4 3/16 To 5/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (XT & XT6 - 2WD)

Application Preferred Range
Camber (1)
Front 0 -3/4 To 3/4
Rear 0 -3/4 To 3/4
Caster (1) 4 1/16 3 5/16 To 4 13/16
Toe-In (1)
Front 0 (0) -1/32 To 1/32 (-1 To 1)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-In (2)
Front 0 -1/16 To 1/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (XT & XT6 - 4WD)

Application Preferred Range
Camber (1)
Front 13/16 1/16 To 1 9/16
Rear -3/16 -15/16 To 9/16
Caster (1) 3 1/2 2 3/4 To 4 1/4
Toe-In (1)
Front -3/16 (-5) -1/4 To -5/32 (-6 To -4)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-In (2)
Front -1/4 -5/16 To -3/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
scientia non olet · About LEMON Manuals