LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1993 >> Legacy Touring >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Air Induction Systems >> Turbocharger Component Testing >> Wastegate Valve
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wastegate Valve

Disconnect and plug wastegate valve control vacuum hose from actuator. Connect test hose to wastegate valve actuator. Apply 9-10 psi (0.6-0.7 kg/cm2 ) air pressure to test hose; wastegate valve linkage should operate. Replace wastegate valve if linkage does not operate.

scientia non olet · About LEMON Manuals