LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1994 >> Justy DL >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test >> Start Circuit Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Start Circuit Test

  1. Remove lower instrument panel below steering wheel. Remove air duct. Disconnect ignition switch harness connector.
  2. Using jumper wire, apply 12 volts to switch terminal "B". Connect test light to switch terminal "S". Turn ignition switch to START position. Test light should come on. If test light does not come on, replace ignition switch.
scientia non olet · About LEMON Manuals