LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1994 >> Legacy Sedan 2WD F4-2.2L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Testing and Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Module HVAC: Testing and Inspection

CHECK FAN CONTROL AMP

1) Connect fan control amp harness connector.
2) Ignition switch ON. Fan switch OFF.







3) Measure voltage of fan control amp. output signal.
4) Ignition switch OFF.
5) Disconnect fan control amp harness connector.







6) Check circuit continuity of fan control amp.
scientia non olet · About LEMON Manuals