LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1998 >> Legacy Outback Limited, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft & Keyless Entry System >> Programming >> Remote Transmitter
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Transmitter

NOTE: Procedures must be performed within 45 seconds.
  1. Perform test sitting on driver's seat. Ensure all doors, rear gate or trunk are closed. Open and close driver's door. Turn ignition switch from ON to LOCK position 10 times in rapid succession (within 15 seconds). DO NOT start engine. Horn will chirp once, indicating system is in programming mode.
  2. Open and close driver's door. Press any button on remote transmitter that needs to be programmed. Horn will sound 2 times indicating that remote transmitter has been programmed. To program additional remote transmitter(s), repeat this step. After programming remote transmitter(s), go to next step.
  3. Remove ignition key from switch. Horn will chirp 3 times indicating that system has exited the programming mode. Check each remote transmitter operation. If remote transmitter does not operate normally, see REMOTE TRANSMITTER under TROUBLE SHOOTING  .
scientia non olet · About LEMON Manuals