Control Module: Service and Repair

A: REMOVAL
1. LHD





1. Disconnect battery ground cable.





2. Remove lower cover and then disconnect connector.





3. Remove transmission control module.
4. Disconnect connectors from TCM.

2. RHD





1. Disconnect battery ground cable.
2. Remove lower cover and then disconnect connector.





3. Remove transmission control module.
4. Disconnect connectors from transmission control module.

B: INSTALLATION
1. LHD
1. Connect connectors to TCM.





2. Install TCM to steering support beam.
Tightening torque: 7.4 ± 2.0 Nm (0.75 ± 0.2 kg-m, 5.4 ± 1.4 ft. lbs.)
3. Remove TCM from steering support beam.

2. RHD
1. Connect connectors to transmission control module.





2. Install transmission control module.
Tightening torque: 25 ± 5 Nm (2.5 ± 0.5 kg-m, 18.1 ± 3.6 ft. lbs.)
3. Installing procedure hereafter is in the reverse order of removal.