Idle Up Control Valve: Service and Repair

1. Disconnect battery ground cable.




2. Disconnect connector from idle air control solenoid valve.




3. Disconnect air by-pass hose from idle air control solenoid valve.




4. Remove idle air control solenoid valve from throttle body.




5. Installation is in the reverse order of removal.

CAUTION: Replace gasket with a new one.

Tightening torque:
6.0 ± 0.8 N.m (0.61 ± 0.08 kg.m 4.4 ± 0.6 ft.lb)