LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (On-Vehicle Service & Testing) >> Dropping Resistor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dropping Resistor: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02037073
  2. Remove air intake duct.
  3. Disconnect connector from dropping resistor.
  4. Remove dropping resistor.
    Fig 2: Locating Dropping Resistor (2.5 L Model)
    G02037074
    Fig 3: Locating Dropping Resistor (3.0 L Model)
    G02037075