LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (On-Vehicle Service & Testing) >> Service Procedure >> Oil Pump Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Assembly: Assembly

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install oil pump rotor assembly to oil pump housing.
    Fig 1: Installing Oil Pump Rotor Assembly To Oil Pump Housing
    G02003347
  2. Install the oil pump cover.

    Tightening torque:  25+/-2 N.m (2.5+/-0.2 kg-m, 18.1+/-1.4 ft-lb)

    NOTE:
    • Align both pivots with the pivot holes of the cover, and install the cover being careful not to apply undue force to the pivots.
    • After assembling, turn the oil pump shaft to check for smooth rotation of the rotor.
      Fig 2: Installing Oil Pump Cover
      G02003348
    • Install the oil seal retainer and seal rings. After adjusting the drive pinion backlash and tooth contact.
      Fig 3: Install Oil Seal Retainer & Seal Rings
      G02003349
scientia non olet · About LEMON Manuals