LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Generators & Regulators) >> Bench Testing >> Diode Assembly >> Testing Negative Diode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing Negative Diode

WARNING: This page is about a different car, the 2002 Subaru Impreza, 2002 Subaru Forester, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check continuity between diode lead and negative side of heat sink. Connect ohmmeter negative lead to diode lead and positive lead to heat sink. See Figure . Continuity should exist. Reverse ohmmeter leads. Continuity should not exist.

scientia non olet · About LEMON Manuals