Select Lever: Assembly
WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all parts before assembly.
- Apply grease [SUNLIGHT 2 (Part No. 003602010) or equivalent] to each parts. < Ref. to AT SELECT LEVER (EXCEPT SPORT SHIFT MODEL) , COMPONENT, General Descriptions> and < Ref. to AT SELECT LEVER (SPORT SHIFT MODEL) , COMPONENT, General Descriptions.>
- Assembly is in the reverse order of disassembly.
- After completion of fitting, transfer the select lever to range "P" - "1", then check whether the indicator and select lever agree, whether the pointer and position mark agree and what the operating force is.