Torque Specifications
WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, 2003 Subaru Baja, 2002 Subaru Outback, and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Application |
Ft. Lbs. (N.m) |
| Generator |
| Bearing Retainer Screw (T1) |
|
| Nut-To-Rear Cover (T1) |
|
| Pulley Nut (T2) |
47 (63.7) |
| Through-Bolt & Screw-To-Front Cover (T1) |
|
| Through-Bolt-To-Rear Cover (T1) |
|
| V-Belt |
| Lock Bolt Through Bolt (Generator Belt Tensioner Lock Bolt) |
18 (25) |
| Slider Bolt (Generator Belt Tensioner Adjustment Bolt) |
|
BRUSH SPECIFICATIONS
Application
|
Specification |
| Baja |
| Brush Length |
| Standard |
.807" (20.5 mm) |
| Limit |
.059" (1.5 mm) |
| Brush Spring Pressure |
| New |
17.26-21.60 oz. (4.8-6.0 N) |
| Limit |
7.91 oz. (2.2 N) |
| Legacy |
| Brush Length |
| Standard |
.807" (20.5 mm) |
| Limit |
.059" (1.5 mm) |
| Brush Spring Pressure |
| New |
17.26-21.60 oz. (4.8-6.0 N) |
| Limit |
7.91 oz. (2.2 N) |
| Outback 2.5L (2002) |
| Brush Length |
| Standard |
.807" (20.5 mm) |
| Limit |
.059" (1.5 mm) |
| Brush Spring Pressure |
| New |
17.26-21.60 oz. (4.8-6.0 N) |
| Limit |
7.91 oz. (2.2 N) |
| Outback 3.0L (2002) |
| Brush Length |
| Standard |
.728" (18.5 mm) |
| Limit |
.197" (5 mm) |
| Brush Spring Pressure |
| New |
16.58-20.81 oz. (4.609-5.786 N) |
| Limit |
9.52 oz. (2.648 N) |
| Outback (2003) |
| Brush Length |
| Standard |
.807" (20.5 mm) |
| Limit |
.059" (1.5 mm) |
| Brush Spring Pressure |
| New |
17.26-21.60 oz. (4.8-6.0 N) |
| Limit |
7.91 oz. (2.2 N) |
ROTOR ASSEMBLY SPECIFICATIONS
| Application |
Specification |
| Slip Ring Continuity Test |
| Specified Resistance |
2.7-3.2 ohms |
| Slip Ring Outer Diameter |
| Except Legacy & Outback (2002) |
| Standard |
.894" (22.7 mm) |
| Limit |
.87" (22.1 mm) |
| Legacy & Outback (2002) |
| Standard |
1.06" (27 mm) |
| Limit |
1.02" (26 mm) |