Select Lever: Disassembly

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the packing.
Remove the grip.
Remove the indicator bulb from indicator cover.
Remove the indicator cover.

Fig 1: Removing Indicator Bulb From Indicator Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the blind.

Fig 2: Removing Sift Level Blind
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip, and then remove the guide plate.

Fig 3: Removing Clip & Guide Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp, and then remove the shift lock solenoid.

Fig 4: Removing Clamp & Shift Lock Solenoid
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring, and button.

Fig 5: Removing Spring, & Button
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion plate.

Fig 6: Removing Cushion Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip, and then remove the "P" range switch.

Fig 7: Removing Clip & Range Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate.

Fig 8: Removing Lock Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet, and then remove the spring pin.

Fig 9: Removing Grommet & Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the arm, and then remove the select lever assembly from guide plate.

Fig 10: Removing Arm, & Select Lever Assembly From Guide Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring and detent arm.

Fig 11: Removing Spring & Detent Arm
Courtesy of SUBARU OF AMERICA, INC.