Front Fog Light Assembly: Removal: Outback

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Turn stone guard counterclockwise, and then remove it.

Fig 1: Turning Stone Guard Counterclockwise
Courtesy of SUBARU OF AMERICA, INC.
Remove mounting bolts.

Fig 2: Removing Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove two clips and lower the mudguard.

Fig 3: Removing Clips & Lower Mudguard
Courtesy of SUBARU OF AMERICA, INC.
Disconnect harness connector (a).
Remove nut (b) then detach fog light assembly.

Fig 4: Removing Nut To Fog Light Assembly
Courtesy of SUBARU OF AMERICA, INC.