Headlight Beam Leveler Switch

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Connect the battery, headlight beam leveler switch connector and circuit tester as shown in the figure.

Measure the voltage at each switch position.

Fig 1: Checking Voltage Between Headlight Beam Leveler Switch Terminals

Courtesy of SUBARU OF AMERICA, INC.

HEADLIGHT BEAM LEVELER SWITCH TERMINALS VOLTAGE

Switch position	Terminal No.	Standard
0	7 (+) and battery (-)	Battery voltage
1	6 (+) and battery (-)	Battery voltage
2	3 (+) and battery (-)	Battery voltage
3	4 (+) and battery (-)	Battery voltage