Pressure Sensor: Installation

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque: 2.4 N.m (0.24 kgf-m, 1.7 ft-lb)

Fig 1: Installing Pressure Sensor
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Replace O-ring with a new one.