LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Abs (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the << YES >> key.
  2. On the << System Select Menu >> display screen, select {Brake System} and press the << YES >> key.
  3. Press the << YES >> key after displayed the information of ABS type.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press the << YES >> key.
    CLEAR MEMORY MODE CHART

    Display screen Contents to be monitored
    Clear memory? Function of clearing trouble code.
  5. When the "Done" and "turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals