Section 205 (Engine Cooling System (H4SO)): General Description: Specifications
WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications Chart
| Cooling system | Electric fan + Forced engine coolant circulation system | ||
| Total engine coolant capacity | l (US qt, Imp qt) | AT model: Approx. 6.9 (7.29, 6.07) MT model: Approx. 7.0 (7.4, 6.2) |
|
| Water pump | Type | Centrifugal impeller type | |
| Discharge performance I | Discharge | 20 l (5.3 US gal, 4.4 Imp gal)/min. | |
| Pump speed - Discharge pressure | 760 rpm - 2.9 kPa (0.3 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Discharge performance II | Discharge | 100 l (26.4 US gal, 22.0 Imp gal)/min. | |
| Pump speed - Discharge pressure | 3,000 rpm - 49.0 kPa (5.0 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Discharge performance III | Discharge | 200 l (52.8 US gal, 44.0 Imp gal)/min. | |
| Pump speed - Discharge pressure | 6,000 rpm - 225.4 kPa (23.0 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Impeller diameter | 76 mm (2.99 in) | ||
| Number of impeller vanes | 8 | ||
| Pump pulley diameter | 60 mm (2.36 in) | ||
| Clearance between impeller and case | Standard | 0.5-0.7 mm (0.020-0.028 in) | |
| Limit | 1.0 mm (0.039 in) | ||
| "Thrust" runout of impeller end | 0.5 mm (0.020 in) | ||
| Thermostat | Type | Wax pellet type | |
| Starts to open | 76 -80°C (169 -176°F) | ||
| Fully opened | 91°C (196°F) | ||
| Valve lift | 9.0 mm (0.354 in) or more | ||
| Valve bore | 35 mm (1.38 in) | ||
| Radiator fan | Motor | Main fan | 70 W |
| Sub fan | 70 W | ||
| Fan diameter x Blade | 320 mm (12.60 in) x 5 (main fan) 320 mm (12.60 in) x 7 (sub fan) | ||
| Radiator | Type | Down flow, pressure type | |
| Core dimensions | Width x Height x Thickness | 691.5 x 340 x 16 mm (27.22 x 13.39 x 0.63 in) | |
| Pressure range in which cap valve is open | Above: 108 ± 15 kPa (1.1 ± 0.15 kg/cm2
, 16 ± 2 psi) Below: -1.0 to -4.9 kPa (-0.01 to -0.05 kg/cm2 , -0.1 to -0.7 psi) |
||
| Fins | Corrugated fin type | ||
| Reservoir tank | Capacity | 0.5 l (0.5 US qt, 0.4 Imp qt) | |