Clutch Switch: Installation
WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Move the clevis pin of the push rod right and left and hold where it moves smoothly, then measure stroke of clutch pedal.
Specified clutch pedal full stroke =A: 130 - 135 mm (5.12 - 5.31 in)
Tightening torque:
- T: 8 N.m (0.8 kgf-m, 5.8 ft-lb)
- If the clutch pedal stroke is out of specification, adjust the stroke. See ADJUSTMENT , Clutch Pedal.
- Connect the clutch switch connector.