Extension Assembly

WARNING: This page is about a different variant/trim than selected.

Thrust washer (50 x 61 x t) to taper roller bearing table roller race side clearance

0.2 - 0.3 mm T (0.008 - 0.012 in T)
NOTE: T: Tight

Fig 1: Thrust Washer Thickness Chart (Tapered Roller Bearing)

Thrust washer to center differential side clearance
0.15 - 0.35 mm (0.0059 - 0.0138 in)

Fig 2: Thrust Washer Thickness Chart (Center Differential)